All Balls Racing logo featuring the stylized brand name, known for industry-leading motorcycle bearing and seal kits.

All Balls Racing | Auckland | Taranaki | Wellington

Regular price $309.99
Sale price $309.99
Regular price
Unit price
per 
Direct OEM replacement at a fraction of the cost Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock Viton rubber fuel resistant gaskets Includes OE ...
Regular price $29.99
Sale price $29.99
Regular price
Unit price
per 
Direct OEM replacement fuel line clamp kit This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic Kit contains 4 of each Fuel Star fuel line OEM re...
Regular price $79.99
Sale price $79.99
Regular price
Unit price
per 
All the bearings and seal required to refit a wheel in one convenient package. Features: Premium high-speed bearings feature low drag. Double lip seals on both sides to provide superior exclus...
Regular price $224.99
Sale price $224.99
Regular price
Unit price
per 
One kit does it all! All of the bearings, seals, shafts*, bushings, thrust bearings (if required) in one all inclusive kit to do the job correctly and completely. All bearing shafts manufactured...
Regular price $139.99
Sale price $139.99
Regular price
Unit price
per 
Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the...
Regular price $410.99
Sale price $410.99
Regular price
Unit price
per 
Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has ...
Regular price $47.99
Sale price $47.99
Regular price
Unit price
per 
Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and rel...
Regular price $306.99
Sale price $306.99
Regular price
Unit price
per 
REAR IND SUSP KIT 50-1172 - CAN AM DEFENDER 800/1000 16-17
Regular price $100.00
Sale price $100.00
Regular price
Unit price
per 
All Balls now offers a complete fork bush kit solution. The kit includes the following products: 2x slider bushings 2x leg bushings All copper washers and O-rings, 2 fork seal snap rings. Quality...
Regular price $55.00
Sale price $55.00
Regular price
Unit price
per 
Choke plunger rebuild kits are intended to be used as a repair kit only. Kit contents will vary and may include o-rings, springs, retaining nuts, boots and cable guides as necessary. Models with mu...
Regular price $212.99
Sale price $212.99
Regular price
Unit price
per 
One kit does it all! All of the bearings, seals, shafts*, bushings, thrust bearings (if required) in one all inclusive kit to do the job correctly and completely. All bearing shafts manufactured...
Sold Out
Regular price $49.99
Sale price $49.99
Regular price
Unit price
per 
Air Cut Off Valve Rebuild Kits Poor running conditions or popping on deceleration are signs that you may need to rebuild the air cut off valve. All of the necessary parts to rebuild the air cut o...
Sold Out
Regular price $49.99
Sale price $49.99
Regular price
Unit price
per 
These cable assemblies feature a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bir...
Sold Out
Regular price $20.99
Sale price $20.99
Regular price
Unit price
per 
An economical way to reseal a leaky carburettor. Features: Includes one gasket per kit (Multi carburettor bikes will require multiple kits). Applications that use paper float bowl gaskets are upgr...
Regular price $74.99
Sale price $74.99
Regular price
Unit price
per 
These kits contains everything required to rebuild your carburetor including seals, jets, needles, screws and other parts depending on model. A great solution as they contain all the parts you requ...
Regular price $73.99
Sale price $73.99
Regular price
Unit price
per 
All the bearings and seal required to refit a wheel in one convenient package. Features: Premium high-speed bearings feature low drag. Double lip seals on both sides to provide superior exclus...
Regular price $110.00
Sale price $110.00
Regular price
Unit price
per 
All Balls now offers a complete fork bush kit solution. The kit includes the following products: 2x slider bushings 2x leg bushings All copper washers and O-rings, 2 fork seal snap rings. Quality...
Sold Out
Regular price $46.00
Sale price $46.00
Regular price
Unit price
per 
This shock bearing kit contains acetal bushings and hardened ground steel pins. Features: Replaces OEM configuration for a fraction of the cost. Kits are sold per shock. Meets or exceeds OEM specs...
Regular price $241.99
Sale price $241.99
Regular price
Unit price
per 
All Balls Fuel Pump Kits are designed to restore lost performance caused by a failing or non-functioning fuel pump. Each kit offers a plug-and-play solution for quick and easy replacement of your O...
Regular price $88.99
Sale price $88.99
Regular price
Unit price
per 
A quality pair of fork oil and dust seals from All Balls Racing. Features: Dyno tested to last 3 to 4 times longer than OEM seals. Directional ribs outside of the seal allow easy installation....
Regular price $190.00
Sale price $190.00
Regular price
Unit price
per 
One kit does it all! All of the bearings, seals, shafts*, bushings, thrust bearings (if required) in one all inclusive kit to do the job correctly and completely. All bearing shafts manufactured...
Regular price $208.99
Sale price $208.99
Regular price
Unit price
per 
One kit does it all! All of the bearings, seals, shafts*, bushings, thrust bearings (if required) in one all inclusive kit to do the job correctly and completely. All bearing shafts manufactured...
Regular price $110.00
Sale price $110.00
Regular price
Unit price
per 
Carburetor repair kits• Kits include all of the necessary components to repair a carburetor. ATV models with two carburetors include components to repair two carburetors.• Kit includes necessary al...
Regular price $854.99
Sale price $854.99
Regular price
Unit price
per 
ALL BALLS starter motors are manufactured with all new components that have been fine-tuned for starting the H-D V-twin engine. Our clutches utilize 20% oversize rollers, and the idler gears are ma...
Sold Out
Regular price $84.99
Sale price $84.99
Regular price
Unit price
per 
All Balls now offers a complete fork bush kit solution. The kit includes the following products: 2x slider bushings 2x leg bushings All copper washers and O-rings, 2 fork seal snap rings. Quality...
30% Off
Regular price $265.99
Sale price $265.99
Regular price $379.99
Unit price
per 
Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum greas...
Regular price $2.00
Sale price $2.00
Regular price
Unit price
per 
All Balls Racing 40-6010 - Pinion Bearing Ring
Regular price $303.99
Sale price $303.99
Regular price
Unit price
per 
High-quality tie rod ends designed to work with original equipment tie rods. Features: Rack kit contains tie rod end and shaft that connects to the steering rack as well as the outer tie rod end, ...
Regular price $74.99
Sale price $74.99
Regular price
Unit price
per 
CARBURETOR REBUILD KIT 26-1518 – KTM SX85 03-17 /HUSQVARNA
Regular price $32.99
Sale price $32.99
Regular price
Unit price
per 
These kits contains everything required to rebuild your carburetor including seals, jets, needles, screws and other parts depending on model. A great solution as they contain all the parts you requ...
Regular price $55.00
Sale price $55.00
Regular price
Unit price
per 
A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.
Regular price $79.98
Sale price $79.98
Regular price
Unit price
per 
A Quality Rear Shock Bearing Kit from All Balls Racing. Kits are supplied with either Needle Bearings or Spherical Bearings according to OE vehicle configuration. Also included are cup type seals-O...

Don't let a worn bearing or leaky seal ruin your weekend mission. All Balls Racing provides the high-quality rebuild kits you need to keep your machine in peak condition. Whether you’re prepping for a ride through Wellington’s hills or maintenance in Auckland or Taranaki, Cyclespot stocks the essential parts to ensure your bike stays smooth, reliable, and ready for any Kiwi adventure.

Please Note: Not all stock is held at our Auckland/Wellington/Taranaki stores.
Some items may ship from our warehouse.

All Balls Racing | Auckland | Taranaki | Wellington